This Celina fireplace is eco-friendly and uses bioethanol, which is an environmentally friendly, non-polluting, odourless, carbon neutral fluid. It allows you to sit around this fireplace without the usual inconvenience of smoke and clothes smelling of smoke. 100% of heat energy produced by a this bioethanol fireplace remains in the room. It is extremely useful for new build homes and apartments without a flue.
Features and Specification:
- Fuel Type: Bio eithanol
- Fuel Capacity: 1300ml
- Glass Thickness: 6mm
- Fireplace Size(WxDxH): 52cm x 20cm x 42cm
- Packing Size(WxDxH): 58cm x 25.5cm x 47cm
- Safety glass with bevelled edge (2 panels)
- Adjustable flame snuffer to snuff the fire out
- Stainless steel double walled burner
Place the Celina Fireplace on a table covered with a blanket or carpet. Identify the fixings and plastic washers, and put them within reach. Assembly is more comfortable if you are sitting down.
Place the stainless steel burner in the slot provided in the base of the fire. Do not add fuel at this stage.
Carefully place both glass panels flat on the table where they will not fall or be damaged. Do not drop the glass panels of they will break. Remove the protective wrappings from the glass panels.
Put a plastic washer on the round fixing bolt. When ready carefully pick up a glass panel and whilst holding the panel so the holes align insert the first fixing in the threaded hole on the side of the fireplace. Make sure there is a plastic washer on the outside of the glass panel.
Still holding the glass panel align the second fixing with the hole in the second hole and insert the second fixing.
Repeat the procedure for the second glass panel.
Do not over tighten the fixings, which should be only finger tight - do not tighten with pliers or similar.
Assembly is now complete. Do not lift the fire place by the glass panels.
Burning time is dependent on the location of the fireplace (outside burns faster than inside), and other factors such as the air temperature. We tested this burner indoors at room temperature and found that 500ml of bioethanol burned for aproximately 1 1/4 hours.
Always observe all the user instructions when using bio-ethanol fuelled fireplaces. Please see the Usage and Maintenance details for full information.
We Also Recommend